hot tub company chemicals
Before adding chemicals to your hot tub, you should check the pH levels. A pH test kit or standard spa test strips can be used to determine your water’s pH levels. To test the water, dip the test strip into the water, shake it to remove any excess water and then compare the reading to the color chart on the back of the kit. If you notice a high reading, it means the water is alkaline and needs to be adjusted.
A sanitiser can kill bacteria and other contaminants in the water. Another type of chemical is an alkalinity reducer. This is used in areas with high alkalinity or acidic water. Alkalinity increasers are used in areas with low alkalinity. To find the correct amount of chemicals for your hot tub company, you can use test strips to measure pH, total alkalinity, and sanitiser levels. Chlorine-based shock treatments can be used to remove contaminants and kill bacteria. They also reactivate the sanitisers. Calcium hardness increaser and No Scale are two other products you can use to raise the calcium level in soft water areas.
Everyone deserves somewhere to relax and rejuvenate with your loved ones. Elite Spas and Leisure are a family-owned business with over 25 years of experience fitting luxury hot tubs, swim spas and saunas so you can be confident of a first class service.
While you’re shopping for chemicals, don’t forget to read the label and understand what each chemical does. Each chemical has a different shelf life, and it’s important to follow packaging instructions for storage and disposal. You can also check with your local council for guidelines for proper disposal. This way, you’ll avoid any hazard to the environment or local wildlife.
hot tub company chemicals – Chemicals For Your Hot Tub
Chlorine is the most popular sanitizer and is the most affordable. However, if you don’t want to use chlorine, you can choose bromine. However, bromine is less effective than chlorine and must be tested more often. It also tends to build up over time. When you use bromine, it should be added in a tablet form and removed when the water is clean.
Chlorine and bromine are the two most common sanitisers used in hot tubs. They work very effectively in disinfecting water and making it clear. Both are available in tablets or granules that are easy to use. The recommended chlorine concentration is between three and five milligrams per liter of water.
Alkalinity levels should be between 80 and 120 ppm for optimal comfort. If the alkalinity is higher than this, you may experience discomfort and irritation. If the pH level is too low, the water will be cloudy and corrosive to equipment. Meanwhile, a high pH level will cause itchy skin and burning eyes.
The next logical step is choosing a chemical that is safe and effective for your hot tub. Bromine is an excellent alternative to chlorine, and comes in tablet and granule forms. This chemical is less harsh on skin and is effective in balancing pH levels. Bromine levels should be between three and six milligrams per liter of water.
