The durability and safe use of ladders have always been a concern for architects and builders.

The stair nose has been around since the early 20th century.

For example, if you visit the beautiful Plaza de España in the historic city of Seville in Spain, pay attention to the steps of the stairs that take you to the upper floor from where you get a spectacular view of the palace square. You’ll notice excellent stair nosings that more appropriately inspired today’s stair designers. This magnificent palace was built in the late 1920s.

There is no doubt that you will notice several step edges in various old buildings with stone, ceramic, marble or parquet clad stairs.

Stair nosings that are installed on the edge of ceramic tile, marble or wood covered stair tread in contemporary buildings and particularly public ones, such as shopping malls, schools, government institutions, are subject to heavy foot traffic. pedestrians.

Installed on the edge of ceramic steps or the like, the aluminum stair tread is designed to provide protection to the edge of stone, marble or ceramic tile on the steps by preventing chipping and fracture. The use of stairs is protected, as steps can become particularly dangerous when wet or worn.

A large number of accidents occur going down stairs when proper attention is not paid. Many of these accidents can result in serious injuries.

Several models of aluminum corners are currently suggested for the protection and safe use of stairs covered with concrete, ceramic, marble, stone or wood:

Stair nosings that are installed directly over the edge of the concrete step.

Stair nosing for flooring with or without a replaceable pvc insert, designed to accommodate ceramic tile in various thicknesses. These stair treads can only be placed during the tile, marble or stone installation process; as the bottom of the front edge of the trim should be under the ceramic tile to ensure a firm grip.

Durable, built-in ribbed PVC strips that come in a variety of colors (ie black, gray, brown, or cream) achieve perfect compatibility with ceramic tile colorations and increased slip resistance.

Retrofit stair nosings, with or without replaceable vinyl insert that are set after installation of tile, stone or marble.

There are no other important distinctions between the two ladder rungs, they both serve the same purposes. Worn treads not only look unsightly, they also compromise the safe use of ladders. As a consequence, this non-slip stair nose shape is a perfect choice for upgrading and renovating existing stairs that are in poor condition and in need of repair. The worn edges of the stairs would be covered and masked.

The grooves on the top surface of the ladder nose will add anti-slip function which ensures the safe use of the ladders. The use of non-slip stair nosing is highly recommended to prevent chipping of stair tiles and to avoid costly and unnecessary ceramic tile installation costs later.

An aluminum stair rail installed on the edge of the wooden stair would also be very beneficial. Stair edges of parquet and laminate flooring will be protected from wear and tear and the unsightly appearance of broken and damaged stair edges will be prevented. Later, damage to the edges of the stairs and their unpleasant appearance, as well as high-cost reforms, were noticed.

Various stair tread profiles that can withstand heavy traffic ensure the use of wooden stairs, and its non-slip ribbed top surface and grooves create slip resistance and allow safe use of stairs.

The risks of slip and fall accidents are reduced, injuries no longer become a concern, and a decorative feature is provided that fits perfectly on the stairs.

The retrofit stair nosing can be glued, taped or screwed to tile, stone, parquet or similar to provide a firm and long-lasting hold. When supplied pre-drilled and with countersunk holes, screw installation will be faster and smoother.

For additional information you can visit our website.

http://www.akteknik.net/index-eng.asp